SARAGUARD-5700

SARAGUARD-5700 |

Non Leaching Anti-Microbial

Product Information
Saraguard-5700 is a methanol free antibacterial and antiviral agent which is suitable for all types of textile substrate. Saraguard-5700 can be applied by padding, exhaust, soaking and spraying methods. Saraguard-5700 is non-leaching antimicrobial agent and is durable to multiple home launderings. It shows antibacterial and antifungal activity by contact mechanism. Saraguard-5700 shows excellent antimicrobial activity on non-woven substrates also. Saraguard-5700 will provide protection against wide range of Gram positive and Gram negative bacteria's, fungi and wide range of viruses. Saraguard-5700 is suitable for application persona1 protective equipment/ clothing (PPE)used in medical and other textile industries. 


Key Features & Benefits
Key Features Benefits
Non-leaching
Durable to multiple home launderings
Broad spectrum
Works on all types of microbes such as Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia, Methicillin-Resistant Staphylococcus aureus (MRSA), Aspergillus Niger
Universal Suitable
 Suitable for cotton, polyester,polyamide, acrylic and polypropylene non woven
Concentrated
Moisture content less than 1%
General Characteristics
Physical appearance
Colourless to yellow liquid
Ionic nature Cationic
pH of 1% solution 4.5 +/-1  
Miscibility Miscible with water
Compatibility  Compatible with cationic and nonionic products  
Stability
Stable to dilute acids and unstable to dilute alkalies
Application

Padding Process

Saraguard-5700 15-40 g/l  
Pick-up 65-70%
Bath pH 5.0-6.0
Drying 140-160 deg.C, 1 min. (all substrates)
120-130 deg.C, 60 sec. (polypropylene)

Exhaust process

Saraguard-5700 1-4 %
Bath pH 5.0-6.0
Bath Temp. 30-40 deg.C
Time 15-20 mins.
Soaking Method 
Prepare 1-4% solution of Saraguard-5700 depending on the durability required in a vessel. Introduce the fabric in the vessel containing Saraguard-5700 solution and soak the fabric for 20-30 minutes at 30-40deg. C with intermittent stirring. Unload the fabric and hydro extract it to remove excess liquor, without rinsing. Dry the fabric at approximately 140°C 


Spraying Method 
Prepare 2-6% solution of Saraguard-5700 depending on the durability required in a vessel. Spray the solution on the fabric using a spray gun then dry the fabric at approximately 140°C 
  • * The product must be diluted with water and kept standing for 60 minutes before application on any substrates. This helps in proper activation of the product and thus increases   the reactivity and durability of the product 
  • * For application in medical textiles the dosage of the above chemical has to be optimized depending on the GSM of the fabric and (%) Expression 
  • * Concentration of the above product to be taken on the basis of durability   requirement. 
  • * Pre-trials are recommended.

Precautions :

The product is supplied in the anhydrous form. The product to be diluted with water just before a treatment only when ready for the processing of textiles. Once added to the pad bath/exhaust bath the stability of such a bath is limited; due to hydrolysis of the active ingredients in our antimicrobial leading to self cross-linking. Hence, a padding bath containing Saraguard-5700 should be used up in the shortest time possible, as extended storage of such bath would lead to a formulation of insoluble particles which may settle as precipitation and reduces performance.

Kindly note that the product is readily dilutable and stored in anhydrous polar solvents like methanol, ethanol, isopropyl alcohol or low molecular weight glycols like MEG or DEG.

Test Results :

  • Cotton, polyester and their blended fabrics finished with 60 g/l Saraguard-5700 show 80-95% reduction in a bacterial count by AATCC-100 after 20 Home Launderings.
  • Polyamide and acrylic fabrics finished with 60 g/l Saraguard-5700 shows 95-100% reduction in a bacterial count by AATCC 100 method.

Instructions For Dilution

Procedure to prepare 5%, 10% & 20% Saraguard-5700



Dilution

5% 10% 20%
Saraguard-5700 12.5 25 50
Butyl Di-glycol 87.5 75 50
Total : 100 100 100
  • Take BDG in a dry vessel
  • To this gradually add butyl di-glycol under constant stirring
  • Continue stirring till a homogenous product is obtained

Even one drop of water will polymerise the material so, care should be taken that there should not be water at any stage of dilution or during packing.

Precautions

Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture.

Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.

The above information is given in good faith and is without warranty

Related Products

Product Name Short Description Description
SARAGUARD-FL

Cost effective antimicrobial

A methanol free antimicrobial agent for finishing of Cotton, Polyester and their blends.

ZOROGUARD-ZP

Zinc Pyrothione based Anti-fungal

A zinc pyrithione based anti fungal and anti-bacterial agent. It is effective against a broad spectrum of microbes. It is suitable for all types of substrates cotton, polyester, polyamide, wool and their blends.