2,4-BIS(2,4-DIMETHYLPHENYL)-6-(2-HYDROXY-4-OCTYLOXYPHENYL)-1,3,5-TRIAZINE (APPOLO-1164) | UV Absorber & Light Stablizer additive

1. STRUCTURE

2. PRODUCT NAME & DETAILS
Product Name	2,4-Bis(2,4-dimethylphenyl)-6-(2-hydroxy-4-octyloxyphenyl)-1,3,5-triazine (Appolo-1164)
Product Code	001305
CAS No	2725-22-6
Molecular Wt.	509.68
Molecular Formula	C33H39N3O2

3. PERFORMANCE DETAILS

Appolo-1 164 is strong UV absorber and light stabilizer.

Recommended for stabilizing thermoset acrylics, polyesters, Polyurethanes. Polyethylene sheets used for agriculture.

4. APPOLO-1164

SPECTRAL TRANSMISSION

5. TYPICAL PROPERTIES
Appearance	Off white to yellowish powder
Melting point	90-92 °C
Purity (HPLC)	Min 99%
Volatiles	Max 0.5%
Transmittance @ 460nm	NLT 85%
Transmittance @ 500nm	NLT 90%

6. SAFETY & TRANSIT HAZARDS

Environmentally Hazardous substance, UN Number: UN 3077, Toxic to aquatic organisms.

7. Food Approval status (for plastic coming in contact with food) Appolo-1164 CAS No.2725-22-6 has EU & FDA approval.In USA according to FDA 21 CFR part section 178.2010

A. At levels not to exceed 0.3 percent by weight of olefin polymers complying with 177.1520(c) of this chapter in contact with food types I, II,IV·B, VI,Vll B, and VIII described in 176.170(c) of this chapter, table 1, under conditions of use Dthrough G as described in 176.170(c), table 2, of this chapter.

B. At levels not to exceed 0.1 percent by weight of polypropylene complying with 177.1520(c) of this chapter, items 1.1a, 1.2,and 1.3 in contact with food under conditions of use A through Has described in 176.170(c), table 2, of this chapter.

C. At levels not to exceed 0.04 percent by weight of polyethylene and olefin copolymers complying with 177.1520(c) of this chapter,items 2.1,2.2, 2.3, 3.1a, 3.1b, 3.1c, 3.2a,and 3.2b havinga minimum density of 0.94 gram per cubic centimeter, in contact with food under conditions of use A through Has described in 176.170, table 2, of this chapter provided that the finished articles used incontact with fatty food types Ill, IV A, V, Vll A, and IX as described in table 1of 176.170(c) of this chapter hold a minimum of 2 gallons (7.6 liters) of food.

D. At levels not to exceed 0.4 percent by weight of ethylene copolymers complying with 177.1520(c) of this chapter, items 3.1a, 3.1b, 3.1c, 3.2a, and 3.2b, having a density of less than 0.94 gram per cubic centimeter, in contact with food under conditions of use Bthrough H, as described in 176.170(c), table 2, of this chapter provided that the finished articles used in contact with fatty food types Ill, IV-A, V, VII-A, and IX hold a minimum of 5 gallons (18.9 liters) of food.

E. At levels not to exceed 0.04 percent by weight of polyethylene having a density of less than 0.94 gram per cubic centimeter,and olefin polymers complying with 177.1520(c) of this chapter,items 2.1, 2.2, 2.3,3.3a,3.3b, 3.4, 3.5, 3.6,4, 5, and 6,in contact with food under conditions of use D through G as described in 176.170(c) of this chapter, table 2, provided that the finished articles used in contact with fatty food types Ill,IV·A, V, VII-A, and IX hold a minimum of 5 gallons (18.9 liters) of food.

F. EU Approval:Appolo-1164 with CAS no. 2725-22-6 is registered under Ref. no. 38885 and has a SML=0.05 only for acqeous food.

Disclaimer

Typical properties should not be considered as specification. Product covered by valid patents are not offered or supplied for commercial use. The Patent position should be verified by the customer. Products will not be supplied to countries where they could be in conflict with existing patents. Products currently covered by valid US patents are offered for R&D; use in accordance with 35 USC 271 (e) (I) Above information is given in good faith and without warrenty.