Login 
Register 
Cellbind-FF is a formaldehyde free binder for pigment printing of cellulosic and its blends. It gives very good brightness and soft and elastic handle feel to printed fabrics. It increases the resistance to abrasion. It imparts very good wash and rubbing fastness. Cellbind-FF can also be used as a coating agent to impart soft feel to the fabric.
| Key Features | Benefits |
| Feel of the fabric handle
|
Soft and elastic handle
|
| Physical appearance
|
Off white liquid
|
| Ionic nature
|
Anionic
|
| pH of 1% solution
|
8 +/- 1
|
| Miscibility
|
Miscible with water
|
| Compatibility
|
Compatible with anionic and nonionic products
|
| Stability
|
Stable to dilute acids and dilute alkalies
|
Paste preparation
Take recommended quantity of Cellbind-FF. Add 20% water and pigment emulsion as per shade depth. Then add Urea with stirring. Then add slowly half the quantity of synthetic thickener so that paste becomes thick. Add liquor ammonia and fixer. Then add balance water with stirring. Finally add balance synthetic thickener till required viscosity is achieved. Stir it further 10 mins. to built viscosity and smoothness.
RECIPE FOR PIGMENT PRINTING
For 100% Cotton (Woven or Knits)
| Pigment emulsion
|
upto 1%
|
above 1% upto 4%
|
above 4%
|
| Cellbind-FF
|
8%
|
12%
|
3 times the pigment
|
| Synthick P-328
|
1.5%
|
2%
|
2 to 2.5%
|
| Urea
|
5%
|
5%
|
5%
|
| Saraprint-AC
|
- | 2% | 2% |
| Liquor ammonia
|
|
1% | 2% |
| Water
|
balance | balance
|
balance
|
Process :-
Print --> Dry in the drier at temp. above 130 deg.C --> Cure at 150 deg.C for 5 mins.
For PE/Cotton blend (Max. upto 67% PE)
| Pigment emulsion | upto 1% | above 1% upto 4% | above 4% |
| Cellbind-FF
|
8%
|
12% | 3 times the pigment
|
| Synthick P-328
|
1.5%
|
2%
|
2 to 2.5%
|
| Urea
|
5% | 5% | 5% |
| Saraprint-AC
|
1% | 2% | 3% |
| Liquor ammonia
|
- | 1% | 2% |
| Water | balane | balance | balance |
Process :-
Print --> Dry in the drier at temp. above 130 deg.C --> Cure at 150 deg.C for 5 mins.
For Coating
| Cellbind-FF
|
50-70 parts
|
| Thickness
|
2.4 parts
|
| Water
|
Reamining |
Storage : Store in cool, ventilated shed away from heat and direct sunlight. Storage temperature should not exceed 35 deg C. Close lids firmly to avoid contact with air and moisture.
Shelf Life : 9 months from the date of manufacturing, if stored under controlled conditions.
The above information is given in good faith and is without warranty
