501 Waterford, C Wing, C.D.Barfiwala Marg,
Juhu Lane, Andheri W, Mumbai 400 058, INDIA.
Phone: +91 22 42184218 • Fax: +91 22 42184350
Email: tcexp@sarex.com | tcexn@sarex.com
Bioclean-(Conc) is a highly concentrated powder form acid cellulase enzyme for bio-polishing of cellulosics and polyester /cellulosic blends. It is applicable at low temperature and wide range pH. The product is to be used in garment dyeing machine and jet dyeing machine where suitable mechanical action is provided which enhances the action of Bioclean-(Conc). It is suitable for colour fading for denim garments and of knits, fabrics&terry; towels.
To avoid excess strength loss of garments and materials after bio- polishing, it is recommended deactiviation of Bioclean- (Conc) after the treatment.
| Key Features | Benefits |
|---|---|
| Application at wide range | Combined peroxide elimination, biorange polishing and dyeing can be carried out |
| Applied at 30-50 deg.C | Saving in Energy |
| Concentrated | Economical |
| Stable Controlled action | Longer Shelf life minimum shade change in dyed material and minimum strength loss |
| Physical appearance | Off White to creamish powder |
| Ionic nature | Nonionic |
| pH of 1% solution | 5 +/- 1 |
| Miscibility | Miscible with water |
| Stability | Stable to dilute acids & dilute alkalies |
| Compatibility | Compatible with nonionic products but not compatible with strong cationic or anionic products. |
| Equipment | Jet dyeing machine or garment dyeing machine. |
| Biopol-Conc | 0.05-0.15% on the weight of fabric/garment |
| pH | 5.5-7 |
| Temperature | 30-50 deg.C |
| Treatment time | 30-60 min |
Note :
Solution of Bioclean (Conc) should be prepared in water of pH 4.8-5.5. Add Bioclean-(Conc) in two steps at the interval of 20-30 min.
After the bio-polishing treatment, raise the temperature to 70 deg.C and/or adjust pH to 10 to terminate action of enzyme. The material can be finished with usual finishing agents.
Recommended Formulation
| Bioclean-(Conc) | 3-5 % |
| Nonionic surfactant (Leutensol AT-80) | 10-20 % |
| Mono sodium Phosphate(MSP) | 10-30 % |
| Anticaking Agent (Precipitated Silica) | 0.5-2% |
| Filler (Sodium sulphate/gypsum) | X % |
It is necessary to maintain homogeneoity during formulation by mixing in a blender.
| Storage | Store in cool, ventilated shed away from heat and direct sunlight.Storage temperature should not exceed 35 deg C.Close lids firmly to avoid contact with air and moisture. |
| Shelf Life | 8 months from the date of manufacturing, if stored under controlled conditions. |